气缸薄板斜立式收(放)板机

设备主要用途/Main Application:

主要用于薄板制程. 如:内层前处理、涂布线、自动爆光机、SES等.

It is mainly used in the thin board treatment process, such as pretreatment of I/L, Coating line, Auto Exposure Machine, SES etc.

设备规格: a：长x宽x高(1400*1100*2110)mm

b：工作高(STD)：WH=900mm±25 mm

c：适用板件规格：

Max:610mm*610mm

Min：250mm*250mm

厚度： 0.075mm-3.2mm

产速：8片/分钟

Device Spec: a: L 1400mm*W1100mm*H2110mm

b: Working Height: 900±25 mm

c: PCB Size:

Max: 610mm*610mm

Min: 250mm*250mm

Thickness: 0.075mm-3.2mm

Capacity: 8 panels/min

设备特点:

a、手臂旋转采用气缸旋转，结构稳定快速。

b、具有二段式整板装置，拍薄板不会有拱起现象。

c、配合各种板件，可于人机面板设定参数，达到最佳工作效能。

d、吸板方式以12只吸盘组吸板，可任意调节。

e 、所搭配的板架与行业内同系列设备可通用。

f 、设备耗电，耗气低且具有省电模式

Features:

a. Robot arm is driven by cylinder which is stable and precise.

b. Equipped with alignment device via 2 speeds not to cause bends when arranging thin board.

c. Setting parameters on the man-machine interface to cooperate with different panels to achieve the best efficiency.

d. 12 group of suction trays are used to suck the panel.

e. The pallet used on this device is current.

f. With low power consumption and air consumption and it also has a power saving model.