水平式( 收) 放板机

设备主要用途/Main Application:
主要用于内层无孔的PCB板的放板. 如:内层前处理、化学前处理、自动线、减铜线磨边线.
It is mainly used for loading the PCBs without holes on the surface in I/L treatment, such as pretreatment of I/L, pretreatment of chemical, automation line, copper-reducing line and edge
grinding line.

设备规格/Device Spec:

a.长x宽x高(L1500*W1080*H1650)mm

b.工作高(STD)/Working Height: WH=900mm±25 mm
c.适用板件规格： Max:610mm*610mm Min：300mm*300mm
厚度/Thickness: 0.1mm-3.2mm 产速/Capacity: 10panels/min
设备特点/Features:
1、横移采用低噪音模组传动，其稳定美观。
2、具有二段式整板装置，拍薄板不会有拱起现象。
3、配合各种板件，人机面板调整参数，达到最佳工作效能。
4、升降机构采用滚珠丝杆传动，其稳定耐用。
5、所有机构设计合理，设备使用方便。
6 、设备可智能区分板件张数确保每次放一片板。
7 、设备耗电，耗气低且具有省电模式

1. It features in low noise, stable performance and a good configuration.
2. Equipped with alignment device via 2 speeds not to cause bends when arranging thin board.
3. Setting parameters on the man-machine interface to cooperate with different panels to achieve the best efficiency.
4. Lifting structure adopts ballscrew to drive which is stable and durable.
5. All the structures are in reasonable designs, so it is convenient to operate the equipment.
6. It can judge the pieces of the panels intelligently to make sure that one piece at one time.
7. With low power consumption and air consumption and it also has a power saving model.

上一主题：DMSE 线

下一主题：粘尘机