伺服悬臂薄板斜立式收( 放) 板机

设备主要用途/Main Application:
主要用于薄板制程. 如:内层前处理、涂布线、自动爆光机、SES等.
It is mainly used in the thin board treatment process, such as pretreatment of I/L, Coating line, Auto Exposure Machine, SES etc.

设备规格/Device Spec:

a：长x宽x高(L1400*W1295*H1800)mm

b：工作高(STD)/ Working Height:：WH=900mm±25 mm
c：适用板件规格/PCB Size： Max:610mm*610mm Min: 250mm*250mm
厚度/Thickness: 0.075mm-3.2mm 产速/Capacity: 8 panels/min
设备特点/Features:
a、手臂采用伺服马达做动力链条传动，其结构稳定，精度准确。
b、具有二段式整板装置，拍薄板不会有拱起现象。
c、配合各种板件，可于人机面板设定参数，达到最佳工作效能。
d 、吸板方式以12只吸盘组吸板，可任意调节。
e 、所搭配的板架与行业内同系列设备可通用。
f 、具有检测两片功能
g 、设备耗电，耗气低且具有省电模式
a. Robot arm is driven by servo motor which is stable and precise.
b. Equipped with alignment device via 2 speeds not to cause bends when arranging thin board.
c. Setting parameters on the man-machine interface to cooperate with different panels to achieve the best efficiency.
d. 12 group of suction trays are used to suck the panel.
e. The pallet used on this device is current.
f. Equipped with overlap checking function.
g. With low power consumption and air consumption and it also has a power saving model.

上一主题：5 0 片履带式翻板机

下一主题：薄板自动刨边线

伺服悬臂薄板斜立式 收( 放) 板机

伺服悬臂薄板斜立式收( 放) 板机