斜立式收放板机

设备主要用途/Main Application:
用于外层有孔的PCB板的收放板.如干膜前处理、防焊前处
理、沉铜前后处理、喷锡前处理、粗磨机
Be used for loading and unloader the PCBs with holes on the surface in O/L treatment line. Such as pretreatment of dry film, pretreatment of solder mask, pre /post-treatment of immersion copper, pretreatment of tin spraying and primary grinding machine.
设备规格/Device Spec:
a.长x宽x高(L1760*W1255*H1183)
b.工作高(STD)/Working Height: ：WH=900±25 mm
c.适用板件规格/PCB Size: Max610mm*610mm Min: 300mm*300mm
厚度/Thickness: 0.3mm-3.2mm 产速/Capacity:8panels/min
设备特点/Features:
1、较适用于表面有孔的板件。
2、具有二段式整板装置，拍薄板不会有拱起现象。
3、配合各种板件，人机面板调整参数，达到最佳工作效能。
4、可智能区分板件的张数，确保每次收放出一片板。
5、整体结构稳定实用。
6 、设备耗电，耗气低且具有省电模式。
1. Apply for the board with holes on its surface.
2. Equipped with alignment device via 2 speeds not to cause bends when arranging thin board.
3. Setting parameters on the man-machine interface to cooperate with different panels to achieve the best efficiency.
4. It can judge the panel pieces intelligently to make sure that one piece at one time.
5. The whole machine is of great stabilization and practical usefulness.
6. With low power consumption and air consumption and it also has a power saving model.

上一主题：斜立式夹纸收板机

下一主题：薄板自动刨边线